Office chair load adjustment: automatic recline or a manual tension knob?

Featherlite Amaze without headrest, with self-calibrating recline

Load adjustment sets how much effort it takes to lean back. An automatic mechanism sets the resistance using your body weight. A manual mechanism gives you a tension knob beneath the seat so you can choose a lighter or firmer recline. The chair’s maximum user weight is a separate specification.

When automatic recline makes sense

If two people share a chair, each can sit down and recline without first resetting a dial. If you move between desks, try the chair unlocked and lean back slowly. The mechanism should support you through the movement. You can still use the tilt lock on models that offer it.

Featherlite chairs with automatic load adjustment

Amaze, Enzo and Opus use self-calibrating multilock mechanisms. Pulse describes its recline as weight-activated and lets you lock three angles.

When to choose a tension knob

Choose manual tension if you prefer a specific feel. Two people of the same weight may want different resistance. For example, you might like a gentle push-back during a phone call and a firmer feel when you pause between typing tasks.

Featherlite chairs with manual recline tension

How to set a manual knob

  1. Set the seat height so your feet are supported. Find the tension knob beneath the seat using the instructions for your model. The seat-height lever and recline lock serve different purposes.
  2. Unlock the recline and lean back gently. If it takes a hard push to move, reduce the tension. If the back gives way sooner than you like, increase it.
  3. Follow the direction markings on your chair. Make a small adjustment, then sit back and test again. Stop when you can lean back smoothly and return upright comfortably.

Does multilock mean automatic?

Multilock tells you that a chair can hold more than one recline position. Tension tells you how much effort it takes to reach a position. Anatom without headrest combines multilock with a manual knob. Amaze without headrest in black combines multilock with self-calibration.

If a listing mentions only a tilt lock or an adjustable lumbar pad, ask which recline control that particular version uses. Compare multilock and single-lock synchro tilt, or use the high-back and medium-back chair comparison to choose your backrest.

Finding the tension control on a black Astro

On the black Astro without headrest, look below the seat for the tension knob. This changes how much effort it takes to lean back. The single-lock control holds the recline, and the gas lift changes seat height. Change just the tension while comparing how the recline feels.

Use the instructions supplied with your chair for the direction of adjustment. Compare Astro versions if you also want a headrest.

Astro under-seat mechanism
Astro under-seat mechanism